![](/images/new-backgrounds/1309905/30990593x1.webp)
Peavey Impulse® 1015P
SPECIFICATIONS
Enclosure:
Peavey Impulse 1015P (domestic)
Frequency response: 56 Hz to 18 kHz
Low frequency limit
Useable low frequency limit
Internal Power Amplifiers (@120 VAC line): Woofer:
800 Watts peak dynamic power
400 Watts at clipping Tweeter:
200 Watts peak dynamic power
100 Watts at clipping
Nominal sensitivity (1W @1M, swept sine input in anechoic environment):
100 dB
Maximum sound pressure level @ 1 meter: 130 dB music peak
Nominal radiation angle:
90˚ horizontal by 45˚ vertical
Transducer compliment:
Model
Box tuning frequency (Fbox): 54 Hz
Electroacoustic crossover frequency: 1600 Hz
Crossover type:
Internal electronic
Crossover slopes:
18 dB/octave (third order) low pass,
18 dB/octave (third order) high pass, both with staggered poles and driver EQ
Electronic input impedance (nominal): 10 k Ohms unbalanced, 20 k Ohms balanced
Input connections:
One combo female XLR and 1/4" phone jack and one male XLR providing balanced operation in parallel. Also has a 1/4" phone
Contour switch:
Reduces
Enclosure materials and finish:
Mounting:
Flying via Peavey Versamount™ 70 (top or bottom of cabinet), Peavey Array Brackets and four rubber feet for floor use. Also pole stand mount.
Dimensions:
28.562" (72.55 cm) tall by 21.312"
(54.13 cm) wide (11.5" {29.21 cm} wide in rear) by 17" (43.18 cm) deep
Optional accessories:
Impulse 1015 floor monitor kit
Net weight: 69 lbs.
Shipping weight: 72 lbs.
Additional remarks:
Also available as a passively
ELECTRONICS AND AMPLIFIER
SPECIFICATIONS:
Electronic Input Impedance (Nominal): Primary balanced input: 10 k Ohms unbalanced, 20 k Ohms balanced
Loop thru input:
High Z
Infrasonic filter protection: 36 dB/octave
For both power amps:
Nominal Amplifier Frequency Response: +0,
Hum and noise:
Greater than 90 dB below rated power.
DDT™ dynamic range:
Greater than 26 dB
THD and IM:
Typically less than 0.1 %
Woofer power amp: Damping Factor:
Greater than 100 @ 1,000 Hz, 4 Ohms.
Power requirements of Impulse 1015P System (domestic):
660 Watts maximum, 180 Watts nominal,
120 VAC, 60 Hz.
47