Matrix Mix features
The Matrix section is fed from the internal Bus 13 thru 16 signals.These internal buses get
their signal from the Input and Groups via the Bus 13-16 assignment switches.The assign-
ment to Buses 13-16 is normally post-fader,a master switch globally changes this to pre-
fader.Each Matrix also has its own External input which can be mixed in with the Bus 13-
16 signals.The External Input signal comes from the four 1/4” TRS jacks located on the rear
of the Master Module.
13- Bus 13 mix level into the Matrix.
14- Bus 14 mix level into the Matrix.
15- Bus 15 mix level into the Matrix.
16- Bus 16 mix level into the Matrix.
EXT IN- External Input mix level into the Matrix,from TRS jack on rear panel
MUTE- Micro-controllable mute control.See Micro-instructions for operation.
LEV- Master Level control for Matrix output.
SOLO- Allows monitoring of the Matrix signal in the Solo system.This feed follows
the master SOLO MODE switch.Pre-fader monitors the actual Matrix mix-bus, Post-Fader
monitors the Matrix signal after the Master Level and Mute controls.In the X-Monitor,the
Solo system makes a distinction between Inputs and Outputs.The Matrix Solo is treated as
an Output by the Solo system.See the Solo Section of the manual for details on the differ-
ent Solo functions and modes.
p.33
Master section 3