Peerless Industries ACC925 CAUTION

9 of 9 ISSUED: 11-19-08 SHEET #: 120-9062-3 06-29-12

Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.

To attach screen to arm (not included), insert the puck of

adapter plate into the tilt bracket slot as shown in ﬁ gure

3.1. Attach brake pad assembly as shown in Detail 3

so that the brake pad is snug against the adapter plate.

Adjust roll position of adapter plate to level screen then

lock puck in place by tightening M5 x 25 mm screw (B) on

the underside of tilt bracket using 4 mm allen wrench (I).

Tighten all (M5 x 20 mm, M5 x 25 mm) screws.

NOTE: To remove screen from arm, remove two

M5 x 20 mm screws (J) and brake pad. Lift screen out of

tilt bracket.

• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely

handle placement of the screen.

• Failure to lock brake pad with two M5 x 20 mm screws (J) and lock tilt bracket with M5 x 25 mm screw (B) can

cause screen to come off mount if hit accidentally.

WARNING

ADAPTER PLATE

BRAKE PAD

TILT

BRACKET

ARM

PUCK

• Do not tighten screws with excessive force. Overtightening

can cause damage to mount. Tighten M5 x 20 mm screws (J)

to 20 in. • lb (2.26 N.M.) maximum torque.

CAUTION

All other brand and product names are trademarks or registered trademarks of their respective owners.