50 Pelco Manual C1456M-D (10/98)5.11.24 Pattern Length
You can set the pattern length to 1.5, 3, or 6 minutes or have two half-patterns of
.75, 1.5, or 3 minutes long.
To set the pattern length:
1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET
FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU
ACCESS). The main menu will appear.
2. If the cursor (>) is not beside Other, move the joystick up or down to position
the cursor beside Other.
3. Press the Iris Open button to enter the submenu entitled Other.
4. Move the joystick up or down to position the cursor beside Pattern Length.
5. Press the Iris Open button. The cursor will move to the right beside the num-
ber of minutes (1.5, 3, or 6).
6. Move the joystick up or down to toggle through the number of minutes (1.5, 3, or
6).
7. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
CAUTION:
If the length
is changed, all patterns
that were stored are
erased.