34 Pelco Manual C1456M-D (10/98)5.11 PROGRAMMING THE SPECTRA™ (VERSION 3.0)
The Spectra® (Version 3.0) dome can be programmed for the following functions:
AGC (automatic gain control) Auto park time Power-up mode
Alarm dwell Auxiliary relays Proportional panning
Alarm pattern Backlight compensation Scan speed
Alarm priority Camera reset Sharpness
Alarm resume Gain Shutter speed
Auto flip disable Limit stops Video zone blanking
Auto focus Pattern length White balance
Auto iris Power line synchronization Zoom limit
The main menu contains six secondary menus:
• Camera
• Line Sync
• Power Up Mode
• Aux
• Alarms, Zone Blank
• Other
Each secondary menu has submenus, which are structured as shown below. Be-
side the menu items are section numbers in parentheses showing where the func-
tions are explained.
1. Camera
First Camera Submenu Second Camera Submenu
Backlight comp (5.11.2) Shutter speed (5.11.7)
Zoom limit (5.11.3) Auto focus mode (5.11.8)
Reset camera (5.11.4) Sharpness (5.11.9)
Gain/AGC (5.11.5) Auto sharpness
AGC mode Sharpness
Gain White balance (5.11.10)
Auto-iris (5.11.6) Auto white bal
Auto-iris mode R-B white bal
Auto-iris level M-G white bal
Auto-iris peak Prev (to first camera submenu)
Next (to second camera submenu)
2. Line Sync (5.11.11)
Line sync
Line sync phase
3. Power Up (5.11.12)
Power Up
4. Aux (5.11.13)
Aux 1 mode
Aux 2 mode
5. Alarm, Zone Blank
Alarm resume (5.11.14)
Alarm dwell sec (5.11.15)
Alarm priority (5.11.16)
Alarm pattern (5.11.17)
Zone blank (5.11.18)
6. Other
Auto flip (5.11.19)
Proportional pan (5.11.20)
Limit stops (5.11.21)
Park time minutes (5.11.22)
Scan speed deg/s (5.11.23)
Pattern length (5.11.24)
The following sections explain how to program the Spectra® (Version 3.0) dome
using the menu choices.