Pelco Manual C1456M-D (10/98) 375.11.4 Reset Camera
Resetting the camera returns the following settings to their defaults.
Setting: Default:
Auto-focus mode Auto
Gain/AGC
AGC mode Auto
Gain No default setting
Backlight comp Off
Shutter speed Auto
Auto-iris
Mode Auto
Level Default value depends on type of camera
Peak Default value depends on type of camera
White balance
Auto white balance On
R-B white balance No default setting
M-G white balance No default setting
Sharpness
Auto sharpness On
Sharpness No default setting
When the camera is reset, the following settings are not changed: zoom limit, park
time, auto flip disable, limit stops, and proportional panning.
Turning off power to the Spectra® (Version 3.0) dome does not reset the camera.
Camera settings are retained in memory, and when the power is turned back on,
the settings will be the same as they were when it was turned off.
To reset the camera:
1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET
FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU
ACCESS). The main menu will appear.
2. If the cursor (>) is not beside Camera, move the joystick up or down to position
the cursor beside Camera.
3. Press the Iris Open button to enter the Camera submenu.
4. Move the joystick up or down to position the cursor beside Reset Camera.
5. Press the Iris Open button to reset the camera.