Pelco C1456M-D Pelco Manual C1456M-D (10/98) 47, 5.11.19 Auto Flip, 5.11.20 Proportional Pan

Pelco Manual C1456M-D (10/98) 475.11.19 Auto Flip

There are two auto flip modes: on or off.

When the auto flip mode is on, the auto flip feature is enabled. When it is off, the

feature is disabled.

To change the auto flip mode:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET

FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU

ACCESS). The main menu will appear.

2. If the cursor (>) is not beside Other, move the joystick up or down to position

the cursor beside Other.

3. Press the Iris Open button to enter the Other submenu.

4. Move the joystick up or down to position the cursor beside Auto Flip.

5. Press the Iris Open button. A star will appear beside Auto Flip and the cursor

will move to the right beside the word On or Off.

6. Move the joystick up or down to toggle between On and Off.

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

5.11.20 Proportional Pan

There are two proportional pan modes: on or off.

When proportional pan mode is on, the proportional pan feature is enabled and the

pan (and tilt) speed will depend on the amount of zoom. At telephoto zoom settings,

the pan (and tilt) speeds will be slower for a given amount of joystick deflection than

at wide zoom settings. This keeps the image from moving too fast on the monitor

when there is a large amount of zoom. This slowing does not happen when going to

a preset, but does occur in turbo mode when high zoom is selected.

When the proportional pan mode is off, the feature is disabled and the pan speed

will not depend on the amount of zoom.

To change the proportional pan mode: