Manuals / Brands / TV and Video / DVR / Pelco / TV and Video / DVR

Pelco C1607M (6/04) Install an Additional Drive

1 32

Download 32 pages, 9.95 Mb

C1607M (6/04) 13

Install an Additional Drive

NOTE: This upgrade kit includes a Pelco-certified hard disk drive to be installed as an additional unit. Using any

other hard disk drive with the DX8000 voids the manufacturer’s warranty for this product.

PREPARE THE DRIVES

Locate where the second drive will go before you install it:

1. Drives should be installed in order from right to left (as you face the front of the unit), beginning with the slot

closest to the CD-RW drive. Refer to Figure 11.

2. Leave no empty drive slots between drives in the drive basket.

CD-RW

DRIVE 1DRIVE 2

FRONT OF DVR

Figure 11. Hard Disk Layout

Contents

Main Page Introduction PARTS LIST TOOLS NEEDED Getting Ready Tools Needed Parts List Page Page Preparing Unit for Drive Installation OPEN THE UNIT CHASSIS Getting Ready C1607M (6/04) 7 COMPONENT LAYOUT Figure 5. DX8000 Interior REAR OF DVR FRONT OF DVR Page Page Disconnect the Data Cable and Power Wire Page Remove the Drive Mount Baskets Install an Additional Drive PREPARE THE DRIVES Page Page SET THE MASTER / SLAVE JUMPERS Figure 15. Setting Drive Jumpers RECONNECT THE DATA AND POWER CABLES gray 1a black blue Page Page Page Page Page Preparing the New Drives to Store Data blue Page Page Page Page PRODUCT WARRANTY AND RETURN INFORMATIONPRODUCT WARRANTY AND RETURN INFORMATION If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to: