REMOTE CONTROL
The unit’s remote control lets you perform most unit functions without the mouse or front panel controls (refer to Figure 4). For information on using the front panel controls, refer to Front Panel on page 9. For information on using the mouse and for general unit operation, refer to the DX4700/DX4800 Server Operation/Configuration manual.
DX4700/DX4800
Figure 4. Remote Control
ìPTZ Controls:
• PRESET: Assigns the position of the selected camera to a
î
ï
ñ
•PATTERN: Assigns the recorded PTZ actions to the
•SET: Starts the PTZ configuration mode.
•CLR: Clears a configuration event.
•AUX: Sends an auxiliary command to the specified PTZ camera.
•PTZ: Starts the PTZ mode for the selected device and displays the
NOTE: PTZ controls are only available for cameras that support and are configured for PTZ operation.
Numeric Keypad: Used for various unit functions, including camera selection, PTZ control, and numeric entry in selected dialog boxes.
MARK: Bookmarks video with the search starting location.
COPY: Starts the export operation.
C4675M (2/11) | 13 |
