Pelco DX8100-ISCI Resume SATABoy Configuration with 8 or 14 HDs

Tech

Tips

Helpful Tips for Pelco Products

World Headquarters

3500 Pelco Way, Clovis, California 93612 USA

USA & Canada Tel: 800/289-9100 Fax: 800/289-9150

International Tel: 1-559/292-1981 Fax: 1-559/348-1120

www.pelco.com

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.

Information subject to change without notice.

Page 12 of 21 DX8100-ISCI_SCSI_CARD_SATABoy.fm

5. Under Use the following IP address: (See Figure 6)

a. Type the IP address that was recorded on the travel tag next to IP address.

b. Type the Subnet mask that was recorded on the travel tag next to Subnet mask.

Figure 6

1. Click OK.

2. Click Close.

Resume SATABoy Configuration with 8 or 14 HDs

1. Open the Internet Explorer on the desktop.

2. Highlight the address bar and type X.X.X.X where X.X.X.X was chosen under Network Setting.

(See Figure 5)

3. Click the Login button

4. Select the RAID INFORMATION option from the main menu.

5. Click the Volu mes tab and check to make sure there is no free space listed on the screen.