Pelco DX8100-ISCI - page 14

Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Information subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Page 14 of 21 DX8100-ISCI_SCSI_CARD_SATABoy.fm
For Upgrading/Downgrading default SATABoy HDs configurations: (i.e. SATABoy HDs from 8
HDs to 14 HDs or 14 HDs to 8 HDs)
1. Open the Internet Explorer on the desktop.
2. High light the address bar and type X.X.X.X where X.X.X.X was chosen under Network Setting.
(See Figure 5)
3. Click Login button
4. Delete Volume(s)
a. Select the CONFIGURE VOLUMES option under the main menu.
b. Select the Delete Volume tab.
c. Place a dot next to Delete Volume. (See Figure 9)
d. Click Delete Volume.
e. Place a checkmark above the Confirm Delete Commend and click Confirm Delete Commend.
f. Click Back.
g. Repeat steps a through e to delete each volume.
Figure 9
5. Delete Raid array.
a. Select Configure Raid under the main menu.
b. Select the Delete Array tab.
c. Click Delete Array.
d. Click Confirm button.