Pelco FR106011 manual Connecting the TRANSMITTER/RECEIVER

CONNECTING THE TRANSMITTER/RECEIVER

Connections to the FT106011 transmitter and the FR106011 receiver are made on the rear panel of the modules (refer to Figure 7) and consist of the following:

•Power connection

NOTES:

–A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as Class 2 and rated as 24 VAC, 200 mA (minimum output).

–In extreme temperature conditions, it is recommended that an industrial-rated outdoor power supply be used.

•Fiber connection

•Contact closure connection

•Data connection

•Audio connection

•Video input connection (transmitter only)

•Video output connection (receiver only)

18 C2649M (9/07)