Pelco FR106011 Indicator Color, Meaning, Possible Cause, Corrective Action, Audio Signal and

Table F. Troubleshooting with Front-Panel Indicators (Continued)

Indicator Color	Meaning	Possible Cause		Corrective Action
	Audio Present LED (		)
Green	Audio is being trans-	–		No action required.
	mitted onto the fiber by
	the audio port or is
	being received from
	the fiber by the audio
	port.
Red	The Audio Select	The Audio Select switch		Ensure that the Audio
	switch is set to an	is set to any of the		Select switch is set to
	invalid position.	following positions: 2, 3,		position 0 or 1 as desired
		4, 5, 6, 7, 8, or 9.		(refer to the Setting the
				Audio Signal and
				Impedance Mode section
				for detailed information).
Intermittent red	An audio overload	The audio input level		Lower the audio input
	condition exists.	exceeds 3.0 Vp-p.		level.
Not lit	Audio is not being	Audio is not present on		No action required.
	transmitted onto the	the channel.
	fiber by the data port or
		Audio connection is		Check audio connections.
	is not being received
		faulty.
	from the fiber by the
		Cable is defective.		Replace cable.
	data port.
				(Continued on next page)

C2649M (9/07) 31