6.0 SPECIFICATIONS
ELECTRICAL |
|
|
Input voltage: | 24 VAC required for pan/tilt | |
Power |
|
|
Requirements | Running | Starting |
Pan: | .31 amp (7.5 vA) | .47 amp (11.2 vA) |
Tilt: | .38 amp (9.2 vA) | .56 amp (13.5 vA) |
Connectors |
|
|
Pan/Tilt: | AMP CPC type (mate supplied) | |
Lens: | Hirschmann MAB6100 | |
Video: | BNC |
|
Camera Power: | Spade lugs |
|
Motors: | ||
Limit Switches: | 5 amp, external adjustment | |
Conductor |
|
|
Requirements: | See Section 3.1 |
|
MECHANICAL
(for detailed specifications refer to PT280 series product manual, C324M.)
Pan: | Movement in horizontal plane: | |
| ||
| ||
Pan Speed: | 12°/sec ±1° (no load condition) | |
Tilt: | ±90° movement in vertical plane | |
Tilt Speed: | 3°/sec ± .5° (no load condition) | |
Max. Load: | 15 lb (6.81 kg) at 5" from tilt table surface to center of gravity | |
Dome Drive: | Lower dome mounts into upper dome with Velcro fasteners; | |
| complete assembly is driven by pan/tilt | |
Max. Camera |
|
|
and Lens Length: | 16.0 inches (40.6 cm) including BNC connector |
14 | PELCO Manual |