TXB-V ZONE PROGRAMMING PROCEDURE

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. To program a zone using a Vicon controller (refer to the manual supplied with the controller):

Step

Procedure

 

 

 

1.

Set left zone limit.

a. Position the Pelco unit at the left limit of the zone.

 

 

b. Issue the zone start command (PRG 8# PRESET) for the zone

 

 

number being programmed; # is a number between 0 and 7 that

 

 

represents zones 1 through 8.

2.

Set right zone limit.

a. Position the Pelco unit at the right limit of the zone.

 

 

b. Issue the zone end command by pressing the Auto Pan key.

 

 

 

3.

Enable the zone label display.

Issue the enable zone label command (PRG 95 PRESET) to display

 

 

the zone label.

IMPORTANT: (Spectra III/Spectra IV and ExSite systems only): After programming a zone, always enable the zone through the Pelco unit programming menu. Refer to the operation/programming manual supplied with the Pelco system.

Operation Notes:

1.Focus speed cannot be set with the Vicon controller.

2.The Event Tour function on the Vicon controller does not function.

3.On-screen titling is only available on Spectra III/Spectra IV (v1.28 and higher).

4.Zone labels use only defaults (Zone 1, Zone 2, etc.)

5.Upon completion of pattern programming, issue an end pattern command (91 Set on the Vicon controller) to enable Turbo speed during panning. If this is not done, Turbo speed will be unavailable until 10 minutes after starting pattern programming.

6.Alarms from the Pelco receiver will not activate alarm LEDs on the Vicon controller.

7.LEDs on the Vicon controller may be out of sync when the receiver’s start-up defaults are changed, when the receiver is reset, or if a receiver alarm triggers a status change. To correct, press and release the affected key.

8.The communication parameters that are displayed momentarily on the selected monitor immediately after initial power-up pertain only to the communication link between the translator board and the Pelco unit. Communication parameters between the translator board and the Vicon controller are selected with jumpers P3 and P4.

22

C656M-E (4/07)

Page 21 Page 23
Page 22
Image 22
Pelco manual TXB-V Zone Programming Procedure, Step Procedure
Page 21 Page 23

TXB-V specifications

The Pelco TXB-V is a prominent model in the realm of surveillance technology, specifically designed to meet the demanding needs of security professionals. As a part of the TX series, this camera is specifically engineered for high-performance applications, making it an ideal choice for various environments including retail, transportation, and critical infrastructure.

One of the main features of the Pelco TXB-V is its advanced imaging capabilities. It typically incorporates a high-resolution image sensor that delivers exceptional video clarity, enabling users to capture detailed footage even in challenging lighting conditions. With its ability to perform well in both daylight and low-light environments, the TXB-V is equipped with a robust infrared (IR) technology, allowing for quality night vision without compromising image integrity.

Another key characteristic of the TXB-V is its versatility. The camera supports multiple resolutions and frame rates, which provides flexibility in terms of storage and bandwidth management. Users can configure the settings according to their specific needs, ensuring optimal performance in various scenarios. Furthermore, the TXB-V is often designed with a weather-resistant housing, making it suitable for outdoor applications whether it be rain, snow, or extreme temperatures.

The TXB-V also boasts advanced video analytics capabilities, which significantly enhance the surveillance experience. This includes features such as motion detection, tamper detection, and line crossing detection. These analytics empower users by allowing them to receive alerts and notifications when unusual activities are detected, effectively enhancing site security.

In terms of connectivity, the Pelco TXB-V typically supports multiple networking options including Power over Ethernet (PoE). This simplifies installation and reduces the need for additional wiring, enabling a more straightforward deployment in various settings. The camera's compatibility with both IP systems and traditional analog systems further extends its applicability across different security infrastructures.

Overall, the Pelco TXB-V combines cutting-edge technology with robust features to deliver an effective surveillance solution. Its high-definition imaging, advanced analytics, weatherproof design, and versatile connectivity make it an excellent choice for anyone seeking to enhance their security infrastructure with reliable and efficient surveillance technology.
Top Page Image Contents