Initial selections
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
INPUT | Press to select the input signal to be played back from the | |
| equipment which has been connected to the Plasma Display. | |
INPUT |
| |
HDMI1 | HDMI signal terminal in SLOT1 | |
HDMI2 | ||
| ||
HDMI3 | HDMI signal terminal in SLOT2 | |
HDMI4 | ||
COMPONENT or RGB signal terminal in SLOT3 | ||
COMPONENT | ||
PC | PC signal terminal in PC IN |
Using dedicated buttons for input selection
Press to select HDMI signal terminals
Press to select component or RGB signal terminal in SLOT 3.
Press to select PC signal terminal in PC IN.
Notes:
•Selecting is also possible by pressing the INPUT button on the unit.
•Input terminal will not be selected if the terminal board is not installed into the SLOT.
•Select to match the signals from the source connected to the component/RGB input terminals. (see page 39)
•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 45), but this function is not the perfect solution to image retention.
PCCOMPO.
HDMI
フ
CH INPUT
DISPLAY
INPUT | MENU | ENTER/■ |
Selecting the On-Screen Menu Language
Press to display the menu screen.
Press to select “SET UP”.
Press to display the SET UP menu.
PICTURE
SET UP POS. /SIZE
SOUND
HDMI 
Press to select |
| Selectable languages | SET UP menu |
|
| |
OSD LANGUAGE. |
|
|
| |||
|
|
| ||||
| English(UK) |
|
|
|
| |
Press to select your |
|
| SIGNAL |
|
| |
| Deutsch |
|
|
| ||
preferred language. |
|
| SCREENSAVER |
|
| |
| Français |
|
|
| ||
|
|
|
| |||
|
| Italiano |
|
| RGB |
|
|
| Español |
| EXTERNAL SCALER MODE | OFF |
|
|
| ENGLISH(US) |
| POWER SAVE | OFF |
|
|
| (Japanese) |
| OSD POSITION | UPPER LEFT |
|
|
|
| OSD LANGUAGE | ENGLISH (US) |
| |
|
| Русский (Russian) |
|
| ||
|
|
|
|
|
| |
14