SET UP for Input Signals
SYNC
Select SIGNAL from the “SET UP” menu during RGB input signal.
SIGNAL | [ RGB ] | 2 | change | |
SYNC | AUTO | |||
XGA MODE | 1024 ×768 | 1 | select | |
REFRESH RATE | 100 Hz | |||
|
|
AUTO 
ON G 
VBS 
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal)
AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
SDI THROUGH
Set the active through function of the Dual Link
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link
SIGNAL | [ Digital ] | 2 | change | |
SDI THROUGH | OFF | |||
|
| |||
REFRESH RATE | 100 Hz | 1 | select | |
|
|
OFF 
ON
ON: Enables active through.
OFF: Disables active through.
Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range: |
|
|
Horizontal | 15 | - 110 kHz |
Vertical | 48 | - 120 Hz |
The dot clock frequency is displayed during digital signal input.
33.7 | kHz | |
60.0 | Hz | |
SIGNAL FORMAT | 1125(1080)/60i | |
|
|
|
|
|
|
33.7 | kHz | |
60.0 | Hz | |
DOT | 108.0 | MHz |
SIGNAL FORMAT | 1125(1080)/60i | |
|
|
|
41