Pelican TH-50VX100U ADVANCED SETTINGS, ● AGC, Notes:, CINEMA, ● BLACK, ● GAMMA, S CURVE, DYNAMIC, MONITOR, STANDARD, EXTENSION, INPUT LEVEL, PICTURE MENU, ●“W/B” adjustment

PICTURE Adjustments

ADVANCED SETTINGS

Enables fine picture adjustment at a professional level.

Notes:

•The adjustment values are memorized separately for each input terminal.

•The adjustment range values should be used as an adjustment reference.

NORMAL IZE			ADVANCED SETTINGS
PICTURE MENU	STANDARD			NORMAL IZE
PICTURE	25			BLACK EXTENSION	0
				INPUT LEVEL
BRIGHTNESS	0				0
SHARPNESS	5			GAMMA	2.2
				AGC		OFF
COLOR TEMP		NORMAL
COLOR MANAGEMENT		OFF		W/B HIGH R	0
ADVANCED SETTINGS				W/B HIGH G	0
				W/B HIGH B	0
				W/B LOW R	0
				W/B LOW G	0
				W/B LOW B	0
				3:2 PULLDOWN		OFF
				STUDIO GAIN		OFF
				NOISE REDUCTION		OFF

● BLACK	Adjusts the dark shades of the image in gradation.
EXTENSION

●INPUT LEVEL Adjustment of parts which are extremely bright and hard to see.

● GAMMA	Available setting values vary depending on “PICTURE MENU”
	settings and the type of input signal, as follows.
PICTURE MENU	S CURVE	1.0 2.0	2.2 2.5	2.6
STANDARD	–	*3		*1
DYNAMIC		*3	–	*1
CINEMA	–	*3	*2
MONITOR	–	*3	–

*1 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TYFB11DHD), GAMMA “2.6” can also be selected.

*2 When 60 Hz signals are received, GAMMA “2.5” can also be selected.

*3 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD), GAMMA “1.0” cannot be selected.

● AGC Increases the brightness of dark signal automatically.

●“W/B” adjustment

W/B HIGH R	0	Adjusts the white balance for light red, light
W/B HIGH G	0
		green or light blue areas.
W/B HIGH B	0
W/B LOW R	0	Adjusts the white balance for dark red, dark
W/B LOW G	0
		green or dark blue areas.
W/B LOW B	0

Less	More
Less	More

Down Up

OFF ON

Less More

Carry out “W/B” adjustment as follows.

1.Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.

2.Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.

3.Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

23