Pelican TH-50VX100U Specifying the scaler, Exit the menu, Select “SET UP”, Display the menu screen, Select “EXTERNAL SCALER MODE” and set

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment.

The setting is valid with the following input signals.

1125 (1080) / 24p·25p·30p·50p·60p

1

2

3

4

Display the menu screen.
										SIGNAL
Select “SET UP”.										SCREENSAVER
										COMPONENT/RGB-IN SELECT
											RGB
	PICTURE						2 OK
										EXTERNAL SCALER MODE	OFF
	SET UP									POWER SAVE	OFF
	POS. /SIZE						1 select			STANDBY SAVE	ON
	SOUND
										POWER MANAGEMENT	OFF
										AUTO POWER OFF	OFF
										OSD DESIGN	TYPE1
Select “EXTERNAL SCALER MODE” and set.
										OSD POSITION	UPPER LEFT
										OSD LANGUAGE	ENGLISH (US)
	SIGNAL						2 change
	SCREENSAVER
	COMPONENT/RGB-IN SELECT						1 select
		RGB
	EXTERNAL SCALER MODE	OFF		OFF		ON
	POWER SAVE	OFF		OFF: Use the built-in scaler.
	STANDBY SAVE	ON		ON: Use an external scaler.
	POWER MANAGEMENT	OFF
	AUTO POWER OFF	OFF		Note:
	OSD DESIGN	TYPE1
				Selecting “ON” in this setting deactivates the following settings and disables
	OSD POSITION	UPPER LEFT
				these operations.
	OSD LANGUAGE	ENGLISH	(US)
				POS. /SIZE menu:					H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE
									(see page 31, 32)
				PICTURE menu:					BRIGHTNESS, COLOR, TINT, SHARPNESS,
									MEMORY SAVE, MEMORY LOAD (see page 22,
								26, 27)
				ADVANCED SETTINGS: 3:2 PULLDOWN, NOIZE REDUCTION (see page
								24)
				SIGNAL menu:					XGA MODE (see page 40)
				OPTIONS menu:					All Aspect (see page 42)
				ASPECT Controls (see page 18)
				“EXT. SCALER” is displayed in the menu screen to indicate that an external
				scaler is in use.
					NORMAL IZE
									EXT.SCALER
					PICTURE MENU			STANDARD

PICTURE25

BRIGHTNESS

COLOR

TINT

Exit the menu.

or

36