Basic Controls

SCROLLING BAR and TEST PATTERNS functions

Pressing activates one of the following two functions. The function button setting can be configured by accessing “Function button assign” in the OPTIONS menu. (see page 42)

SCROLLING BAR

TEST PATTERNS

Press

SCROLLING BAR

 

Press to

 

 

select

SCROLLING BAR

“YES”.

YES

N O

Press.

 

 

Activates the SCROLLING BAR ONLY screensaver. After 15 minutes, the display enters standby mode.

SCROLLING BAR ONLY

Press

TEST PATTERNS

 

Press to

 

 

select

TEST PATTERNS

“YES”.

YES

N O

Press.

 

 

Each time you press , a different test pattern is displayed (seven in all).

 

 

 

 

Color Bars

Red

 

 

 

Green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frame

 

 

Black

 

 

 

 

 

 

 

 

 

 

 

 

Blue

 

 

 

 

 

1% window

(2 lines × 2 dots)

To exit this mode, press any button.

To exit this mode, press any button other than .

Note:

AUTO POWER OFF is deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 37)

EXT. SCALER function

Each time you press , an external scaler is activated or deactivated.

EXTERNAL SCALER MODE ON

OFF: Use the built-in scaler.

ON: Use an external scaler.

The setting is valid with the following signals.

1125 (1080) / 24p • 25p • 30p • 50p • 60p

With input signals other than these, specifying “ON” will display the following message.

Input signal must be 1125p(1080p)

EXTERNAL SCALER MODE ON

Note:

You can also turn the built-in scaler ON and OFF by accessing “EXTERNAL SCALER MODE” in the SET UP menu. (see page 36)

17