SCREENSAVER (For preventing image retention)

Reduces screen image retention

These functions prevent the occurrence of an “image retention” on the display when turned ON.

WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.

ON1: Shifts the image every 30 seconds.

ON2: Shifts the image at a dot level pitch depending on screen-detection.

PEAK LIMIT: Suppresses image contrast (peak brightness).

Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 45)

1

2

Select “WOBBLING” or “PEAK LIMIT”.

Select “ON1”, “ON2” or “OFF”

 

 

 

 

 

 

 

 

 

SCREENSAVER

 

 

 

 

 

 

(WOBBLING).

 

 

 

 

 

 

 

 

START

 

 

 

 

2 change

Select “ON” or “OFF” (PEAK

 

FUNCTION

 

 

 

 

 

 

 

 

NEGATIVE IMAGE

 

 

1

select

LIMIT).

 

SIDE BAR ADJUST

 

BRIGHT

 

 

 

 

 

 

 

 

 

 

WOBBLING

 

OFF

 

 

 

 

 

 

PEAK LIMIT

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

SIDE BAR ADJUST

Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display field.

To reduce the risk of such an image retention, illuminate the side bars.

This function may be applicable to the non-picture area.

1

Select “SIDE BAR ADJUST”.

2

Adjust the menu.

Side bars

4:3 mode

Image

retention

SCREENSAVER

 

 

2

change

 

 

START

 

 

 

 

 

 

 

 

 

 

FUNCTION

NEGATIVE IMAGE

 

1

select

 

 

SIDE BAR ADJUST

BRIGHT

 

 

 

 

 

 

 

 

WOBBLING

OFF

OFF

DARK

MID

BRIGHT

PEAK LIMIT

OFF

 

 

 

 

 

3 Exit from SCREENSAVER.

or

Notes:

•To reduce the occurrence of image retention, set the “SIDE BAR ADJUST” to “BRIGHT”.

•The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such flashing.

35