6INTERIOR SEAL:
Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the door frame to bow and hinder operation.
A.Add a sealant bead across the inner sill and 6" up each jamb between the frame and rough opening.
B.Apply insulating foam sealant. From the interior,
LQVHUWWKHQR]]OHRIWKHDSSOLFDWRULQWRWKHVSDFH between the door and the rough opening
DSSUR[LPDWHO\SDVWWKHHGJHRIWKHIUDPH DQGSDVWWKHMDPEH[WHQVLRQV DQGDSSO\D GHHSEHDGRIIRDP7KLVZLOODOORZURRP IRUH[SDQVLRQRIWKHIRDPDQGZLOOPLQLPL]H VTXHH]HRXW$SSO\VHDODQWDFURVVWKHLQWHULRU surface of the shims to create a continuous seal. Follow foam manufacturer's instructions.
Note: DO NOT place any foam between jamb extensions and the rough opening.
C.Check the door operation by opening and closing the door.
Note: If the door does not operate correctly, check to make sure it is still plumb, level, square and that the sides are not bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims, and reapply the insulating foam sealant.
Interior
6AB
6CA 
6"
