Troubleshooting Adjustable Strike Latching Issues

TROUBLESHOOTING - Adjustable Strike Latching Issues

Issue 1:

Door is difﬁcult to latch. Remove the strike and adjustable strike shim then reinstall the strike.

Issue 2:

Door needs to close more tightly against the weather-strip.

Remove the strike and adjustable strike shim. Remove the tabs from the adjustable strike shim and install

so that the thicker side is visible at the strike edge. Reinstall the strike.

"EK4USJLF4IJN FOEWJFX

'BDUPSZ

JOTUBMMFE

TJEF

4JEFUPCF VTFEJO *TTVF

5"#4

"EKVTUBCMFTUSJLFTIJN

TJEFWJFX

4USJLF GSPOUWJFX

Page 19

Image 19

Pella 81DU0100 installation instructions Troubleshooting Adjustable Strike Latching Issues

Contents

Wide Pella Corporation Part Number 81DU0100Instrucciones en español en el reverso Remember to USE Appropriate Personal Protective Equipment Rough Opening Preparation Rough Opening Preparation For Doors Using Optional Sill PAN GO to StepGO to Step Apply sill ﬂashing tape. Cut a Optional Sill Pan InstructionsCut two 9 pieces of ﬂashing tape with a RIWKHWDSHDSSOLHGWRWKHVLGHŶDQJH7KH Prepare the Door for InstallationDQJOHRQWRWKHHWHULRU Designer Series Doors Setting and Fastening the DoorFor doors with no lock/bore Clip or Frame Screw Installation, go to Step Setting and Fastening the Door3ED Check door operation. Open and close the door to check for Double Doors Only Door Frame Corner Integrating the Door to the Water Resistive Barrier Apply the top ﬂashing paper. Cut one piece Door Replacement in Siding Without Nail FINHead Flashing Instruction and Rough Opening Preparation Apply top ﬂashing tape. Cut a piece of ﬂashing 0DNHVXUHWKHWDSHLVDSSOLHG Door Replacement in Siding Without Nail FIN Out-Swing Screw Locations In-Swing Screw Locations KROHVFUHZVLH ORFDWLRQGHWDLOV See C for Clip Application Details Installation Clip MethodFasten the door to the opening by driving Check the door operation by opening and closing the door Interior Seal6AB 6CA Sealing the Door to the Exterior Wall Cladding Replacement Frame HWHULRUIDFHRIWKHGRRU Sealing the Door toExterior Wall Cladding Insert backer rod into the space around Finishing Instructions Interior Finishing Exterior Finishing Care and Maintenance Important Notice Issue Troubleshooting Adjustable Strike Latching Issues