8
9.Click the RED X box on the top right side of the dialog to exit the Configuration setup dialog.
10.Click on the Video & Lighting Protocol adapter in the Local System box, then click START.
Note: If the Video & Lighting adapter does not show up under the Local Systems, you can manually type in the adapter’s IP address in the System Name field. The adapter’s default IP address is 192.168.2.3
11.Click the
Start ScreenLogic button
to start the ScreenLogic program.
ScreenLogic Video &
Lighting Protocol 
Adapter address
Note: Please note it may take a few minutes for the video camera to complete its configuration for the first time before the video appears.
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
