10
Installing Lights for the first time
Have the Powerline Interface module ready to connect to COM 1 port on the ScreenLogic Video & Lighting Protocol adapter during the program installa- tion setup. Each light switch must be setup one at a time.
WARNING - All switches work must be installed by a licensed electrician, and must conform to the National Electric Code and all national, state, and local codes.
To install the PCS Light switches:
Note: PCS light switches are compatible with incondescent light bulbs only. Lights with florescent light bulbs cannot be used.
1.Click the ScreenLogic Connect icon 
on your desktop. The following screen will be displayed.
2.Be sure that the Video & Lighting adapter is selected and is populated in the system name field.
3.Click the
Configure ScreenLogic button.
System name 
ScreenLogic system 
password
ScreenLogic Video & 
Lighting Protocol
Adapter address
4.Click the Configure Lighting button to configure the lights.
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
