5
Step 2: Updating or installing ScreenLogic Connect software on your PC
ScreenLogic Connect is the program that will allow you to configure and operate your IntelliTouch pool/spa control system.
1.Connect the Video & Lighting protocol adapter to port 1, 2, 3, or 4 on your wireless router.
2.Run setup.exe on the installation CD.
3.Follow the prompts to update or install ScreenLogic Connect.
Installing the system for the first time
Have the camera(s) cable(s) ready to connect to the ScreenLogic Video & Lighting Protocol adapter during the program installation setup. Each camera must be setup one at a time.
To setup the ScreenLogic Video & Lighting Protocol adapter for the first time:
1.Click the ScreenLogic Connect icon 
on your desktop. The screen shown below will be displayed.
Note: The default IP address for the Video & Lighting Protocol adapter is 192.168.2.3. If necessary, you can view and configure the Video & Lighting Protocol Adapter IP settings by clicking the “Configure IP Info” button.
2.Click the Configure ScreenLogic button.
ScreenLogic system 
password
ScreenLogic Video & 
Lighting Protocol
Adapter IP address
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
