Pentair Legend II Pool Connections, Installing the Twist Lock Pressure Relief Valve Wall Fitting

II. Installation Instructions

A. Legend® II Components

The Legend® II Box Contains:

1.Cleaner Head

2.Sand & Silt Bag

3.Sweep Hose

4.Complete Feed Hose

a.1 - 18 in. hose

b.1 - 2 ft. hose

c.1 - 4½ ft. hose

d.3 - 6 ft. hoses

e.1- Back-Up Valve

f.4 - Swivels

g.1 - Wall Fitting

h.12 - Mender Nuts

i.7 - Hose Floats

j.1 - Pressure Tester

2

B. Pool Connections

The Legend® II comes equipped to connect to a female threaded 1-1/2" dedicated return line. An adjustable gate valve with a pressure gauge should be installed to allow a regulated amount of water flow from your pool system to the Legend® II. For more information contact our Technical Support Department at 1-800-831-7133.

Also, if the pool doesn't have a dedicated cleaner line please contact our Technical Support Department also.

C. Installing the Twist Lock Pressure Relief Valve (Wall Fitting)

1.Take out any existing pool cleaner and/or wall fitting.

2.Turn on the filtration pump and flush out the plumbing line.

3.Turn off filter pump

4.Remove the Wall Adapter from the Wall Fitting and screw Adapter by hand into the dedicated line. Turn until tight.

5.Take the Wall Fitting and Twist Lock the Wall Fitting into the Wall Adapter 1/4 turn; to a snug fit. Once the Wall Adapter is secure you can now twist lock and unlock to remove Wall Fitting with ease from the Wall Adapter.

LEGEND® II INSTALLATION MANUAL