Pentair LX-100EZ owner manual Motorized Valves

MOTORIZED VALVES

Your control system is designed to activate two motorized valves, which automatically rotate between pool and spa circulation whenever Push-button #1 (SPA) is activated by the Hand-held Remote. These valves are also activated from the “FILL” and “DRAIN” positions of the SPA Service Switch at the LX-100 RF Power/Load Center.

An additional motorized valve may have been installed for a custom hydraulic application, such as a fountain or waterfall, or (in lieu of a booster pump) to activate your pool cleaner.

A toggle switch is located on the rear of each Valve Actuator. This switch is used by the Pool Builder to set the correct valve rotation direction.

DO NOT ADJUST THIS SWITCH POSITION.

Rev. F 3-26-04 25 P/N 520050