SYSTEM OPTIONS

AUTOMATIC COUNTDOWN CYCLE

There is a 4-position configuration switch (designated S2) located on the Receiver circuit board. This switch can be used to set a countdown cycle (time-out feature) for the Spa and/or Aux1 circuit. Once this feature has been enabled, the equipment will automatically turn off after the countdown cycle irrespective of how the circuit was turned on

(by Hand-held Remote or optional Indoor Remote, or Spa-side Remote).

Use the end of a paper clip or other blunt instrument to slide the appropriate switch at S2 to the "ON" or "OFF" position, in accordance with the following diagram:

P/N 520050

14

Rev. F 3-26-04

Page 14
Image 14
Pentair LX-100EZ owner manual System Options Automatic Countdown Cycle