Manuals / Pentair / Household Appliance / Heat Pump

Pentair VS-3050 Priming the pump for the first time, or after service, Volute

Models: VS-3050

1 40
Download 40 pages 7.2 Kb
Page 13
Image 13

7

Priming the pump for the first time, or after service

Before the IntelliFlo VS-3050 pump is started for the first time it must be primed. To prime a pump means filling the pump and suction pipe with water. This process evacuates the air from all the suction lines and the pump. It may take several minutes to prime depending on the depth of water, pipe size and length. It is easier to prime a pump if you allow all the air to escape from the pump and pipes. The water cannot enter unless the air can escape. Pumps do not hold prime, the pool piping system has that task.

CAUTION - To avoid permanent damage to the IntelliFlo pump, before starting the pump, fill the IntelliFlo housing strainer with water so that the pump will prime correctly. If there is no water in the stainer the pump will not prime.

•NEVER run the pump dry! Running the pump dry may damage the seals, causing leakage and flooding!

•Do not add chemicals to the system directly in front of pump suction. Adding undiluted chemicals may damage the pump and will void the warranty.

•Open gate valves before starting system.

•Pump will prime itself when used in flooded suction system.

•Be sure to release all air from filter and piping system.

•The IntelliFlo pump is a variable speed pump. Typically the lower speeds are used for filtration and heating. The higher speeds can be used for spa jets, water features, and priming.

CAUTION - Before starting this procedure, first read the following

Before removing the pump lid:

Clamp

Lid

1.

Press the Stop button if the pump is running before proceeding.

 

2.

Disconnect the communication cable from the pump.

 

3.

Disconnect main power supply

Volute

4.

Close the gate valves in suction and discharge pipes.

 

5.

Release all pressure from pump and piping system.

 

6.

Never tighten or loosen the clamp while the pump is operating.

 

WARNING! If the pump is being pressure tested, release all pressure before removing the trap cover.

Do not block the pump suction while the pump is running. If a body part blocks the pump suction it may cause severe or fatal injury. Small children using the pool must ALWAYS have close adult supervision.

WARNING! FIRE and BURN HAZARD - The pump motor may run at a high temperatures. To reduce the risk of fire, do not allow leaves, debris, or foreign matter to collect around the pump motor. To avoid burns when handling the motor, shut off the motor and allow it to cool for 20 minutes before trying to work on it. The IntelliFlo provides an automatic internal cutoff switch to protect the motor from heat damage during operation.

IntelliFlo VS-3050 Installation and User’s Guide

Page 12 Page 14
Page 13
Image 13
Pentair VS-3050 important safety instructions Priming the pump for the first time, or after service, Volute
Page 12 Page 14

VS-3050 specifications

The Pentair VS-3050 is a highly efficient variable speed pool pump designed for residential swimming pools. With its advanced technology and user-friendly features, it provides an innovative solution for pool owners looking to optimize energy use and maintain crystal-clear water. Its capabilities not only reduce operational costs but also enhance the overall pool experience.

One of the standout features of the VS-3050 is its variable speed motor, which allows users to adjust the pump's speed according to their specific needs. This flexibility enables significant energy savings as the pump operates efficiently at lower speeds for routine tasks such as filtration, while higher speeds can be utilized for heavy-duty tasks like vacuuming or water feature operation. Compared to traditional single-speed pumps, the VS-3050 can reduce energy consumption by up to 90%, leading to lower electricity bills and a smaller carbon footprint.

The VS-3050 also boasts a user-friendly digital control interface, making it easy for pool owners to set schedules and adjust speed settings. The intuitive display guides users through programming, allowing them to create customized operation schedules that align with their habits and pool maintenance needs. Additionally, its ability to integrate with automation systems means users can control pump settings remotely, further enhancing convenience.

Durability is another key characteristic of the Pentair VS-3050. Built with robust materials, the pump is designed to withstand the rigors of outdoor conditions while providing reliable performance year after year. The pump features a quiet operation mode, making it a welcome addition to any backyard setting without disturbing the tranquility of outdoor relaxation.

Moreover, the VS-3050 is designed for ease of installation and maintenance. With a compact footprint and lightweight construction, it can easily fit into most existing setups without requiring extensive modifications. Maintenance tasks are simplified, encouraging pool owners to keep their systems running smoothly.

In summary, the Pentair VS-3050 is an exemplary variable speed pool pump that combines advanced technology, efficiency, and user convenience. Its energy-saving capabilities, easy-to-use control interface, durable construction, and low maintenance make it a top choice for pool owners seeking to enhance their pool experience. Embracing the VS-3050 means investing in a sustainable future for backyard leisure while ensuring the water remains clean, clear, and inviting.