Pentair VS-3050 Section 5 Troubleshooting

IntelliFlo VS-3050 Installation and User’s Guide

The IntelliFlo VS-3050 alarms and warnings are indicated by flashing LEDs on the control panel. For

example, if a “Drive T emperature” warning occurs, the LED will blink two times, then Off, then blink two

times. This sequence is repeated until the condition is cleared.

•W arning condition: If a warning condition occurs the pump will be continue to run but at a reduced

speed. The Green LED executes a sequence of blinks to indicate which alarm or warning has

occurred.

•Alarm condition: If an alarm condition occurs the pump will drive stop running. The red LED

flashes continuously to indicate the presence of an alarm. The alarm LEDs will reset when the

condition clears.

Alarm and warning LED sequence

Section 5 Troubleshooting

CAUTION: Before installing this product, read and follow all warning notices and

instructions on page ii.

ehtemitforebmuN

knilblliwDEL mralAnoitpircseDnoitcA

2gninraWerutarepmeTevirDerutarepmetevirdevissecxEsahnafrotomehterusnE.1

.noitalitnevrofaeraetauqeda

.looco

twolladnarotompotS.2

otdeepsrehgihatarotomnuR.3

.wolfriagniloocevorpmi

5mralanwonknUeruliafcinortcelE.pmupt

eserotrewopelcyC.1

.evirdecalpeR.2

6mralAerutarepmeTevirDerutarepmetevirdevissecxEsahnafrotomehterusnE.1

oitalitnevrofaeraetauqeda

otdeepsrehgihatarotomnuR.2

.wolfriagniloocevorpmi

7mralAtuOrewoPwolegatlovylppuS.

egatlovylppusreporperusnE

8mralAtnerrucrevOtnerrucevirdevissecxElacinahcem/diulfenimaxE.1

.daolrevofoecruo

srofmetsys

dnarotomezigrene-eD.2

.yleerfsnipsrotomfienimreted

.evirdecalpeR.3

9mralAegatlovrevO ssubevirdnoegatlovevissecxEsdeepsneewtebgnihctiwsdipaR.1

segatlovevissecxeesuacnac

.ssubCDs'evirdehtno

.egatlovylppu

sreporperusnE.2