iii

IMPORTANT SAFETY PRECAUTIONS (continued)

WARNING — Water temperature in excess of 100° Fahrenheit may be hazardous to your health. Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above normal body temperature of 98.6° F. (37° C.). The symptoms of hyperthermia include: drowsiness, lethargy, dizziness, fainting, and an increase in the internal temperature of the body.

The effects of hyperthermia include: 1) Unawareness of impending danger. 2) Failure to perceive heat. 3) Failure to recognize the need to leave the spa. 4) Physical inability to exit the spa. 5) Fetal damage in pregnant women. 6) Unconsciousness resulting in danger of drowning.

WARNING — The use of alcohol, drugs, or medication can greatly increase the risk of fatal

 

hyperthermia in hot tubs and spas.

WARNING —

To reduce the risk of injury, do not permit children to use this product unless they are closely

 

supervised at all times.

WARNING —

For units intended for use in other than single-family dwellings, a clearly labeled emergency

 

switch shall be provided as part of the installation. The switch shall be readily accessible to

 

the occupants and shall be installed at least 5 feet (1.52 m) away, adjacent to, and within

 

sight of, the unit.

WARNING —

When setting up pool water turnovers or flow rates the operator must consider local codes

 

governing turnover as well as disinfectant feed ratios.

WARNING —

Before servicing the system, switch the main power OFF and remove the communication

 

cable from the pump.

CAUTION —

Install the pump a minimum of five (5) feet from the inside wall of the pool and spa. Canadian

 

installations require a minimum of three (3) meters from pool water.

CAUTION —

A No. 8 AWG or larger conductor must be wired to the motor bonding lug.

CAUTION —

This pump is for use with permanently installed pools and may also be used with hot tubs and

 

spas if so marked. Do not use with storable pools. A permanently installed pool is constructed

 

in or on the ground or in a building such that it cannot be readily disassembled for storage. A

 

storable pool is constructed so that it may be readily disassembled for storage and reassembled

 

to its original integrity and has a maximum dimension of 18 feet (5.49m) and a maximum wall

 

height of 42 inches (1.07m).

CAUTION —

For hot tubs and spa pumps, do not install within an outer enclosure or beneath the skirt of a

 

hot tub or spa unless so marked.

CAUTION —

IntelliFlo is capable of generating systems pressures up to 50 psi. Installers must ensure that

 

all system components are rated to withstand at least 50 psi. Over pressurizing the system

 

can result in catastrophic component failure or property damage.

General Installation Information

•All work must be performed by a licensed electrician, and must conform to all national, state, and local codes.

•Install to provide drainage of compartment for electrical components.

IntelliFlo VS-3050 Installation and User’s Guide

Page 4 Page 6
Page 5
Image 5
Pentair VS-3050 important safety instructions Important Safety Precautions
Page 4 Page 6

VS-3050 specifications

The Pentair VS-3050 is a highly efficient variable speed pool pump designed for residential swimming pools. With its advanced technology and user-friendly features, it provides an innovative solution for pool owners looking to optimize energy use and maintain crystal-clear water. Its capabilities not only reduce operational costs but also enhance the overall pool experience.

One of the standout features of the VS-3050 is its variable speed motor, which allows users to adjust the pump's speed according to their specific needs. This flexibility enables significant energy savings as the pump operates efficiently at lower speeds for routine tasks such as filtration, while higher speeds can be utilized for heavy-duty tasks like vacuuming or water feature operation. Compared to traditional single-speed pumps, the VS-3050 can reduce energy consumption by up to 90%, leading to lower electricity bills and a smaller carbon footprint.

The VS-3050 also boasts a user-friendly digital control interface, making it easy for pool owners to set schedules and adjust speed settings. The intuitive display guides users through programming, allowing them to create customized operation schedules that align with their habits and pool maintenance needs. Additionally, its ability to integrate with automation systems means users can control pump settings remotely, further enhancing convenience.

Durability is another key characteristic of the Pentair VS-3050. Built with robust materials, the pump is designed to withstand the rigors of outdoor conditions while providing reliable performance year after year. The pump features a quiet operation mode, making it a welcome addition to any backyard setting without disturbing the tranquility of outdoor relaxation.

Moreover, the VS-3050 is designed for ease of installation and maintenance. With a compact footprint and lightweight construction, it can easily fit into most existing setups without requiring extensive modifications. Maintenance tasks are simplified, encouraging pool owners to keep their systems running smoothly.

In summary, the Pentair VS-3050 is an exemplary variable speed pool pump that combines advanced technology, efficiency, and user convenience. Its energy-saving capabilities, easy-to-use control interface, durable construction, and low maintenance make it a top choice for pool owners seeking to enhance their pool experience. Embracing the VS-3050 means investing in a sustainable future for backyard leisure while ensuring the water remains clean, clear, and inviting.
Top Page Image Contents