When [Highlight Correction] is set to O, the minimum sensitivity is 200.Setting the Shake Reduction

By using this function, you can correct camera shake during shooting. You can select the optical correction only (Sensor Shift) or both the optical and electronic correction (Dual). The default setting is [Sensor Shift].

Sensor Shift

For correcting camera shake optically only

Dual

For correcting camera shake both optically and electronically

Off

Neither optical nor electronic camera shake correction is performed.

1 Use the four-way controller (23) to select [ShakeReduction] in the [A Rec. Mode] menu.

2 Press the four-way controller (5).

A pull-down menu appears.

3 Pres the 4button.

The setting is saved.

• In 9 (Green) mode, the setting is fixed to [Sensor Shift].

• [Dual] cannot be set in the following situations:

-when . (Fireworks), c(Digital SR), X (Digital Wide), F (Digital Panorama) or N(Frame Composite) is selected as the capture mode

-when the sensitivity is set to 3200 or 6400

-when g(Self-timer), j(Continuous Shooting), A(Burst Shooting(L)), C (Burst Shooting(H)), i (Remote Control), h (0-sec Remote Control) or l (Auto Bracketing) is selected as the drive mode

-when the flash is activated

-when the picture is taken without pressing the shutter release button halfway

For correcting camera shake in C(Movie) or c(Time-Lapse Movie) mode, use the Movie SR function (p.114).

When [Dual] is set, the optical correction is used whenever the camera can correct shaking optically.

3 TakingPictures

99