Pentax 12761, 12772 Setting the Playback Shortcut, Resetting to Default Settings (Reset), 5 Press the 4button, 3 Press the 4button, to select [Pixel Mapping]

4
	Use the four-way controller (23)	Pixel Mapping
	to select [Pixel Mapping].	Checks the image sensor
			and corrects defective
			pixels
			Pixel Mapping
			Cancel
			OK OK

5 Press the 4button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] appears on the display. Use the AC adapter kit K-AC129 (optional) or replace the batteries with those having sufficient power.

Setting the Playback ShortcutYou can turn on the camera by holding down the Q button.

1 Use the four-way controller (23) to select [Playback Shortcut] in the [WSetting] menu.

2 Use the four-way controller (45) to select O or P.

O Starts up in playback mode

PDoes not start up in playback mode

3 Press the 4button.

The setting is saved.

Resetting to Default Settings (Reset)

You can reset the camera settings to their defaults. Refer to “Default Settings” (p.205) for the reset settings.

1 Use the four-way controller (23) to select [Reset] in the [WSetting] menu.

2 Press the four-way controller (5).

The [Reset] screen appears.

6 Settings

181