3
Changing Camera Settings
111

Setting the Operation Sounds

Youcansetthecameraoperationsoundsin[Operations Sounds]and[Vol-
ume Settings] of the [Setup] menu.
There are the following three camera operations sounds.
Shutter sound The sound played when the shutter release button is pressed.
Focus sound The sound played when the shutter release button is half-pressed and the camera is
focused on the subject.
Warning sound The sound played when an attempt is made to perform an operation that cannot be
performed.
Youcanselect[All]or[ShutterSounds]in[Operation Sounds].
The camera operation sounds can be set to OFF/¢££ (Low volume)/
¢¢£(Medium volume)/¢¢¢ (High volume) in [Volume Settings].

Changing File Names

Youcanchangethefirsttwocharactersoffilenames.
1 Select [Change File Name] in the [Setup] menu and then press
the $ button.
The [Change File Name] screen appears.
2 Use the !" buttons to select a
character.
Youcanenterahalfwidthalphanumericchar-
acter (uppercase only).
3 Press the $ button and then select
the second character in the same way.
4 Press the MENU/OK button.
The file name is registered, and then the [Setup] menu reappears.
Note -----------------------------------------------------------------------------------------------------------
• When[ColorSpaceSet]inthe[Setup]menuissetto[AdobeRGB],onlytheveryfirstcharacterisap-
plied.