1
Various Shooting Functions
75
Shooting with Miniaturize
Takes images that give the impression that they are close-ups of a miniature.
This mode is effective when shooting from a high vantage point while look-
ing down at a diagonal angle.
1 In the [Shooting] menu, select [Effect] > [Miniaturize], and then
press the $ button.
The [Effect] > [Miniaturize] screen appears.
2 Press the !"#$ buttons to change the settings, and then
press the MENU/OK button.
3 Press the MENU/OK button.
The Miniaturize shooting screen appears.
The areas outside of the unblurred focus area are shown in a semi-trans-
parent gray.
4 Press the Fn2 button.
The screen for setting the position and range of blurring appears.
5 Move the position of the focus area
with the !" buttons.
Change the vertical/horizontal orientation
of the focus area by pressing the Fn2 button
while this screen is shown.
6 Set the width of the focus area with
the #$ buttons.
7 Press the MENU/OK button.
The shooting screen returns.
Note -----------------------------------------------------------------------------------------------------------
• Theamountofblurringintheimageshownontheconfirmationscreenimmediatelyaftertheshotis
taken will differ slightly from that of the actual image.