2
Playback Functions
95
Caution -------------------------------------------------------------------------------------------------------
• ThepicturedisplayisoffwhilethecameraisconnectedwithanAVcableorHDMIcable.
• TheaudioofthevideoisoutputfromtheAVdevice.AdjustthevolumeontheAVdevice.
• ThewhitesaturationdisplayisoffwhilethecameraisconnectedwithanHDMIcable.
Note -----------------------------------------------------------------------------------------------------------
• WhenconnectingwithanAVcable,confirmthevideoformatoftheAVdevice.AVdevicesinJapanare
set to the NTSC format (used in Japan and elsewhere). If the device you want to connect to uses the
PALformat(usedinEuropeandelsewhere),thenyoumayneedtoset[PAL]in[Video Out Mode] of
the[Setup]menubeforeconnectingthedevice.Thedefaultsettingvariesdependingonthecountry
or region where you purchased the camera.
• TheviewswitchestosingleframeviewwhenanHDMIcableisconnectedordisconnected.
• Theresolutionissetto[AUTO]duringHDMIoutput.IftheresolutionoftheimagesdisplayedontheAV
deviceislow,changethesettingin[HDMIOutput]ofthe[Setup]menu.

Setting DPOF

Youcanorderprintsofthestillimagesstoredinthememorycardatastore
with a print service.
1 Display the image to set in playback mode and then press the

MENU/OK button.

The [Playback] menu appears.
2

Select [DPOF] and then press the

$ button.

3 Select [1 File] or [Select All].
If you selected [1 File], use the #$ buttons to select a file.
Selecting [Cancel All] cancels the DPOF setting for all files.
4 Press the MENU/OK button.
DPOF is set and the symbol appears on the playback screen.
Caution -------------------------------------------------------------------------------------------------------
• DPOFcannotbesetinthefollowingcases.
• RAWfiles
• Moviefiles
• Imagesstoredininternalmemory
• Memorycardislocked.