2
Playback Functions
90

Correcting Brightness and Contrast (Level Compensa-

tion)

Youcancorrectthebrightnessandcontrastofshotstillimages.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [Level Compensation] and then press the $ button.
3 Select [AUTO] or [MANUAL] and then press the $ button.
The original image is displayed on the top left, and the corrected image on
the right.
If you select a file that cannot be corrected, an error message appears and
then the [Playback] menu reappears.
Ifyouselected[AUTO],gotostep6.
4 Use the ADJ. lever to switch the
histogram points.
The points at the left side, center, and right
side are switched.
The histogram indicates the number of pixels
on the vertical axis, and the shadows, mid-
tones, and highlights from left to right on the
horizontal axis.
If you press the Fn2 button while this screen is
displayed, the operating procedure appears.
Pressing the Fn2 button again redisplays the original screen.
5 Use the #$ buttons to adjust the positions of the points.
6 Press the MENU/OK button.
A message appears to indicate processing is being performed, and then the
corrected image is saved as a new image.
Points