8 Appendix
Problem | Cause | Remedy |
The subject is | The subject is difficult to | The camera may have difficulty in |
not in focus | focus on | focusing on such subjects as: low- |
|
| contrast subjects (a white wall, a blue |
|
| sky, etc.), dark subjects, |
|
| objects, |
|
| difficult to get proper focus when |
|
| shooting through a window or a net. Try |
|
| shooting using the focus lock (p.33) or |
|
| Manual Focus (p.91). |
| The subject is not in the | Locate the desired subject in the focus |
| focusing area | frame J(focusing area) in the center |
|
| of the LCD monitor. If it is difficult to do |
|
| so, first lock the focus on the desired |
|
| subject (focus lock), and then move the |
|
| camera to recompose. (p.33) |
| The subject is too close | Set the focus mode to q (Macro) or |
|
| r (Super Macro). (p.90) |
| The focus mode is set to | Normal pictures will be out of focus if |
| q (Macro) or r (Super | taken with the focus mode set to |
| Macro) | q (Macro) or r (Super Macro). |
The flash does | The flash mode is set to | Set the flash mode to Auto or b. (p.93) |
not discharge | Off |
|
| The Capture mode is set | The flash will not discharge in these |
| to C (Movie) mode, | modes. You can cancel the |
| Continuous Shooting, | setting in (Sport) mode and E (Pet) |
| Infinity, (Sport) mode, or | mode. |
| E (Pet) mode |
|
|
|
|
The USB | The USB Connection | Set the USB Connection setting to PC. |
Connection | setting of the camera is | |
with a personal | set to PictBridge. |
|
computer does |
|
|
not function |
|
|
properly. |
|
|
The USB | The USB Connection | Set the USB Connection setting to |
Connection | setting of the camera is | PictBridge. (p.184) |
with a printer | set to PC. |
|
does not |
|
|
function |
|
|
properly. |
|
|
Very occasionally, static electricity may cause camera malfunction. In this case, remove the battery and install it again. If the camera is then working properly, normal condition is restored and you can continue using the camera.
200