4 TakingPictures

84

Shutter release button

Four-way controller

OK button

Continuous Shooting (Continuous Shooting Mode)

You can switch the Drive mode to [Continuous Shooting] mode. Pictures are taken continuously while the shutter release button is pressed.

1

Press the four-way controller (2) in Capture mode.

2

Press the four-way controller

 

 

 

 

(45) to select j (Continuous

 

 

 

 

 

 

 

3

Shooting).

Drive Mode

 

 

Press the OK button.

Continuous Shooting

 

 

 

4

The camera is ready for continuous shooting.

 

 

 

Press the shutter release button

MENU Cancel

OK OK

 

halfway.

 

 

 

The focus frame on the LCD monitor will light green when the camera is in focus.

5 Press the shutter release button fully.

Pictures are taken continuously while pressing the shutter release button. Shooting stops when you release the shutter release button.

•You can continue shooting until the SD Memory Card or the built- in memory is full.

•The interval will vary depending on the Recorded Pixels and Quality Level settings.

•The interval of continuous shooting may become longer under the following conditions.

-When Sensitivity is set to 1600

-When using Intelligent zoom

-When using Digital SR, Natural Skin Tone, Half-length Portrait, or Night Scene mode

-When using D-Range Comp.

-When using the Date Imprint function

•The flash will not discharge in Continuous Shooting mode.

•Continuous shooting is not available in Movie and Frame Composite mode.

•The focus, exposure and white balance are detemined in the first frame.