Shutter release button

Four-way controller

OK button

Shooting in Multi-exposure Mode

You can switch the Drive mode to [Multi-exposure Shooting] mode. You can overlap multiple frames while creating a single picture.

1

Press the four-way controller (2) in Capture mode.

2

Press the four-way controller (45)

 

 

 

 

 

 

3

to select (Multi-exposure).

 

 

 

 

 

 

Use the four way controller (23) to

Multi-exposure

 

 

 

 

Drive Mode

 

 

 

specify the number of the picture-

 

 

 

4

shots.

Number of Shot 3

Press the OK button.

MENU Cancel

OK OK

5

Press the shutter release button halfway.

 

 

The focus frame on the LCD monitor will light green when the camera is in focus.

6 Press the shutter release button fully.

7 Repeat step 5 and 6 for the specified number of picture- shots.

•When you select , you can use (2 sec. Self-timer), which enables you to take a picture two seconds after the shutter release button is pressed, or use the Remote Control (optional) to release the shutter, to reduce camera shake and blurring.

•To cancel Multi-exposure shooting halfway, change the Drive mode.

•When you cancel the Multi-exposure shooting before the specified number of picture-shots are taken, the pictures already taken will not be recorded.

•When shooting in Multi-exposure mode, the recorded pixels are fixed to 5M. (When using the Half-length Portrait together with Multi-exposure, the recorded pixels are fixed to 3M.)

4 TakingPictures

85