Troubleshooting
Problem | Cause | Remedy | |
| The batteries are not | Check if the batteries are installed. If not, | |
| installed | install batteries. | |
|
| Check orientation of the batteries. | |
The camera will | The batteries are | Reinsert the batteries according to the | |
not turn on | installed incorrectly | +- symbols in the battery | |
|
| compartment. (p.19) | |
| The batteries are | Insert new batteries or use the AC | |
| exhausted | adapter. | |
| The camera is | The display is off when the camera is | |
| connected to a | ||
| connected to a computer. | ||
No image appears | computer | ||
| |||
on the display | The camera is | The display is off when the camera is | |
| connected to the AV | ||
| connected to an AV equipment. | ||
| equipment | ||
|
| ||
| The brightness level of | Adjust the brightness level in [Brightness | |
| the display is set too | Level] in the [W Setting] menu. (p.152) | |
| dark | ||
|
| ||
The display is |
| When the Power Saving function is on, | |
| the display automatically darkens after a | ||
hard to see | Power Saving function | certain amount of time. Press a button to | |
| return to the normal brightness level. | ||
| is on | Select [Off] in [Power Saving] in the | |
|
| ||
|
| [W Setting] menu to turn the Power | |
|
| Saving function off. (p.153) | |
| The flash is charging | Pictures cannot be taken while the flash is | |
| charging. Wait until charging is finished. | ||
|
| ||
The shutter will | There is no available | Insert an SD Memory Card with available | |
space on the SD | |||
not release | space or delete unwanted images. (p.23, | ||
Memory Card or in the | |||
| |||
|
| ||
| Recording | Wait until recording is finished. | |
The picture is dark | The subject is too far | The picture becomes dark if the subject is | |
when using the | away in a dark | too far away. Take picture within the | |
environment, such as | |||
flash | specified flash range. | ||
a night scene | |||
|
|
9 Appendix
165