Turning the Camera On and Off

Power switch

Q button

Turning the Camera On in Capture Mode

1 Press the power switch.

The display turns on and the lens extends. The camera turns on in the capture mode.

If [Language/] screen or [Date Adjust] screen appears when you turn on the camera, follow the procedures on p.29 to select the display language and/or set current date and time.

2 Press the power switch again.

The display turns off, the lens closes, and the camera turns off.

1 GettingStarted

Checking the Memory Card

The memory card is checked automatically when the camera turns on. +appears on the display when there is no SD Memory Card inserted in the camera. In this case, images and sound files will be saved in the built-in memory. rappears instead of awhen the write-protect switch on the SD Memory Card is in the locked position. Images and sound cannot be recorded when the write-protect switch is locked.

Memory status

38

05/05/2008 14:25

If the batteries have been removed from the camera for a long time, when they are reinserted and the camera is turned on, the message [Battery depleted] may appear. This can also happen when using the camera for the first time; however this is not a malfunction. Turn the camera off, wait a minute and then turn the camera on again to reset the camera. The date and time and other settings may also be reset. Follow the procedure on p.31 to set these settings again.

27