4 TakingPictures

Saving Your Settings (Memory)

The Memory function is for saving the current camera settings even when the camera is turned off.

For some camera settings, the Memory function is always set to O(On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O(On) or P(Off) in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.) If you select O(On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P(Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off.

Item

Description

Default

Setting

 

 

Face

The Face Recognition mode set with the Ibutton (p.51)

P

Recognition

 

 

Flash Mode

The flash mode set with the four-way controller (4) (p.79)

O

Drive Mode

The drive mode set with the four-way controller (2) (p.85,

P

 

p.86)

 

Focus Mode

The focus mode set with the four-way controller (5) (p.76)

P

Zoom Position

The zoom position set with the Zoom/w/x button (p.73)

P

Sensitivity

The [Sensitivity] setting on the [ARec. Mode] menu (p.81)

P

EV

The [EV Compensation] setting on the [ARec. Mode]

P

Compensation

menu (p.83)

 

Digital Zoom

The [Digital Zoom] setting on the [ARec.Mode] menu

O

(p.75)

 

 

DISPLAY

The display information display mode set with the 4/

P

Wbutton (p.84, p.97)

 

 

File No.

If a new SD Memory Card is inserted when On has been

O

selected, file numbers are assigned sequentially.

 

 

90