5.2 Horizontal angle measurement (left)
1Level the instrument, and after the power on set the vertical angle 0 point.
2Sight the first object using the horizontal clamp and tangent screw as well as screw as well as the telescope clamp and tangent screw.
3Press the [R/L] key to switch the horizontal angle display to counterclockwise reading (HL).
Subsequent operation will be done as in [5.1 Horizontal angle measurement (right), but the order of collimation is reversed.
To switch the mode back to ”right”, press the [R/L] key again.
•If the power turns off during the counterclockwise mode, the display returns to a clockwise horizontal angle display when power is turned on.
35
