132
Linking AF Point and AE During
In [Link AF Point and AE] (p.102) of the [ACustom Setting] menu, you can link the exposure and focus point in the focusing area during
1 | Off | Exposure is set separately from focus point. |
2 | On | Exposure is set in accordance with focus point. |
5 FunctionReference
Using the
Metering is weighted at the center of the screen. Use this metering when you want to compensate the exposure by experience, instead of leaving it to the camera. The illustration shows that sensitivity increases as the pattern height increases (center). This mode does not automatically compensate for backlit scenes.
Using the Spot Metering
With spot metering, brightness is measured only within a limited area at the center of the screen as shown in the illustration. You can use this in combination with the AE lock (p.143) when the subject is extremely small and proper exposure is difficult to obtain.
Setting the Meter Operating Time
Sets the exposure metering time in [Meter Operating Time] in the [ACustom Setting] menu (p.102). The default setting is [10sec].
1 | 10sec | Sets exposure metering timer to 10 seconds. |
2 | 3sec | Sets exposure metering timer to 3 seconds. |
3 | 30sec | Sets exposure metering timer to 30 seconds. |