136

• Turn the e-dial while pressing the mcbutton and change the EV Compensation value. (p.142)

•Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [ACustom Setting] menu. (p.143)

•You can automatically correct the sensitivity if appropriate exposure cannot be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.117)

•Set the aperture to the sposition while holding down the auto-lock button when using a lens with an aperture ring.

5 FunctionReference

Exposure Warning

If the subject is too bright or too dark,

the aperture value will blink in the viewfinder and on the LCD panel. If the

subject is too bright, choose a faster

shutter speed. If it is too dark, choose a slower shutter speed. When the aperture value indication stops blinking, you can take the picture with proper exposure.

If both the shutter speed and aperture value are blinking, this indicates being out of metering range and the proper exposure cannot be obtaind even if the shutter speed is adjusted.

Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.