Using the Built-in Flash

Compensating Flash Output

You can change the flash output in a range of –2.0 to +1.0. The Flash Compensation values are as follows for 1/2 EV and 1/3 EV.

Step interval

Flash Compensation

 

 

1/2 EV

–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0

 

 

1/3 EV

–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0

 

 

*Set interval of steps in [Expsr Setting Steps] in the [ACustom Setting] menu. (p.143)

Set in [Flash Exp. Comp.] in the [ARec. Mode] menu. (p.100)

 

Rec. Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Bracket

 

 

 

 

 

AE Metering

 

 

 

 

 

Focusing Area

1.0

 

 

 

AF Mode

0.5

 

 

 

Flash Exp. Comp.

0.0

 

 

 

 

0.5

 

 

 

 

 

 

 

Cancel

OK OK

 

 

 

 

 

 

• m blinks in the viewfinder when the flash pops up during Flash Compensation. (p.20)

If the maximum flash output is exceeded when corrected to the plus (+) side, no compensation will be effective.

Compensating to the minus (–) side may not effect the image if the subject is too close, aperture is low or sensitivity is high.

This flash compensation is also effective for external flash units which support P-TTL auto flash mode.

149

5 FunctionReference