Using High-Speed Flash Sync Mode

With the AF360FGZ, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless.

Attaching and Using the AF360FGZ on the Camera

1Remove the hot shoe cover and attach the AF360FGZ.

2Turn the mode dial and set the exposure mode to bor a.

3Turn on the AF360FGZ.

4Set the AF360FGZ sync mode to HSb (high-speed flash sync.).

5Confirm that the AF360FGZ is fully charged and then take the picture.

• The b will light in the viewfinder when the flash is ready (fully charged).

•High-speed flash sync is only available when the shutter speed is faster than 1/180 sec.

•High-speed flash sync is not available when the exposure mode is set to p (Bulb).

Using in Wireless Mode

Shoot using the flash without connecting the camera and flash with a cord by using two AF360FGZ units.The High-speed sync mode is also available in wireless mode.

Be sure to set the two AF360FGZ units to the same channel. See the AF360FGZ operating manual for details.

157

5 FunctionReference