Problem | Cause | Remedy | |
AE lock function | AE lock is not | Use AE lock with any setting other than a | |
does not | available when set to | ||
a(Manual) mode or | (Manual) mode or p(Bulb) mode. | ||
operate | |||
p(Bulb) mode |
| ||
|
| ||
|
|
| |
| When flash mode is |
| |
| set to [Auto |
| |
| discharge] or [Auto | Set flash mode to [Manual discharge] or | |
| flash+Redeye | ||
| [Manl flash+Redeye reduct]. (p.51) | ||
| reduct], the flash will | ||
|
| ||
| not discharge if the |
| |
Flash does not | subject is bright |
| |
discharge | Mode dial is set to | Set mode dial to any setting other than | |
| a (Flash OFF) | a (Flash OFF). (p.47) | |
|
|
| |
| H(Scene) mode is |
| |
| set to A(Night | Set H(Scene) mode to any setting other | |
| Scene), K(Sunset), | than A(Night Scene), K (Sunset), | |
| D(Candlelight) or | D(Candlelight) or E(Museum). (p.47) | |
| E(Museum) |
| |
The power | The camera does |
| |
zoom system |
| ||
not have the power | Use manual zoom. (p.50) | ||
does not | |||
zoom function |
| ||
function |
| ||
|
| ||
|
|
| |
USB connection | The transfer mode is | Set transfer mode to [PC]. | |
set to [PictBridge] | |||
with computer |
|
| |
An error occurred |
| ||
does not work |
| ||
properly* | while sending USB | Change the transfer mode to | |
| data |
| |
USB connection |
|
| |
with printer does | The transfer mode is | Set transfer mode to [PictBridge]. (p.85) | |
not work | set to [PC] or |
| |
properly |
|
| |
|
|
|
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
193
6 Appendix
*Refer to p.13 of the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details on connecting the camera to a PC.